Estimated in-stock date 06-30-2024. Place your order now for delivery priority!
One of the largest charging tanks available in the marketplace, the Air Venturi Carbon Fiber Charging Tank weighs much less than a steel scuba tank. Better yet, the advantage of carbon fiber over steel allows for a higher pressure capability of 4,500 psi, meaning more charges for your favorite PCP airgun and more shooting time for you.
Fill your air rifles and pistols with the simple fittings and be on your way to more pest control, target shooting and even competition. With 4,500 psi and a whopping 98 cu. ft. capacity, enjoy the most refills of your 3,000 psi airguns. The tank features stainless steel fittings, a 24 in. microbore hose and a rubberized hand wheel for controlled filling. The integrated pressure gauge lets you know when you're reaching your full charge, and the bleed valve is conveniently located on the valve.
Even shooting teams will be delighted at the number of fills they get from the Air Venturi Carbon Fiber PCP Charging Station. Averaging more than 40 fills, this tank is a practical choice for many shooting venues. For example, approximately 42 charges are provided on a 3,000 psi gun with a 215cc cylinder from a beginning gun reservoir pressure of 1,500 psi. You can expect more than 20 full charges on empty 3,000 psi gun with a 215cc cylinder. (The total number of fills vary based on the maximum charging capacity and the reservoir size of the gun(s) being charged.)
Comes with Jubilee Gun Charging Valve that incorporates a patented device restricting the flow rate into the airgun.
This tank has a 5-year retest cycle and a 15-year life cycle.
This compressor features an in-line gauge that shows the pressure in the line as you are refilling the tank, which is helpful to prevent overfilling. This gauge does NOT show internal pressure! To check your internal pressure, plug the end of the hose with a test plug and open the valve with the bleeder fully closed.
Additionally, there may be a slight movement in gauge’s valve connection when not under pressure. This is no cause for concern and will not cause any leaks or malfunctions in use.
Before purchase, please contact your local air supplier to see if they can fill this tank or buy one of our compressors.
This carbon fiber tank has a 300 bar DIN valve. Your local dive shop will have the ability to fill your tank.
If you plan on filling your high-pressure carbon fiber tank at a paintball shop, you will need to fill through the hose on the charging station with the Air Venturi Double Male Quick-Disconnect Coupling AV-00046 [PY-A-5202].
To fill at a firehouse, you will need to fill through the hose on the charging station with the Air Venturi Firehouse Adapter, Male SCBA Fitting With Male Quick-Disconnect For Adapting To Firehouse Fill Stations AV-00048M [PY-A-5750].
PLEASE NOTE: This is a carbon fiber tank. In many towns your local fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use similar tanks for breathing equipment during rescues.
The calculations below assume the 98 cu ft Wingman is filled to 4500 PSI. A "full fill" refers to the gun being refilled to the maximum operating pressure. It's important to understand that most rifles do not need to be filled to their max pressure to offer a good number of consistent, usable shots.
Airgun | Max Fill Pressure | Air Cylinder Size | # of Full Fills |
---|---|---|---|
Air Arms S510 XS Carbine | 3625 psi | 186 cc | 30 fills |
Air Arms S510 XS Xtra | 3625 psi | 288 cc | 19 fills |
Air Force Aluminum Cylinders | 3000 psi | 490 cc | 28 fills |
Air Force Carbon Fiber Bottle | 3625 psi | 475 cc | 10 fills |
Air Venturi Avenger | 4350 psi | 180 cc | 4 fills |
Benjamin Marauder Rifle | 3000 psi | 215 cc | 53 fills |
FX Impact Compact | 3625 psi | 300 cc | 14 fills |
FX Crown MKII | 3625 psi | 480 cc | 9 fills |
FX Maverick Sniper | 3625 psi | 580 cc | 7 fills |
Umarex Gauntlet | 3000 psi | 213 cc | 33 fills |
Air Venturi Carbon Fiber PCP Charging Station
Assembly includes:
- 98 cu. ft. carbon fiber tank, 4,500 psi
- DIN 300 bar PCP charging station
- DIN 300 bar valve with burst disc
- Inline pressure gauge 0-400 BAR
Charging Station:
- 4,500 psi max pressure
- 24 in. microbore hose with 1/8" BSPP
- Male and female threaded ends, each 1/8" BSPP
- Stainless steel female quick-disconnect coupling attached to output end of hose
- Includes test plug for checking pressure remaining in the tank
Specifications:
- Carbon fiber filament wound over aluminum bladder
- 98 cu. ft. air capacity
- 4,500 psi max pressure
- DOT-approved / DOT-SP 11194
- 13 lbs. dry weight
- 7.5" wide
- 25" tall to top of valve
- Empty weight 12.95 lbs
- Filled weight 19.1 lbs
This item is not eligible for coupon discounts
Item Code: AV-4598HPT-SS [PY-A-5905]
Specs
Weight | 13.0 lbs |
Reviews
There are no reviews yet.