Benjamin Recharge HPA Compressor, 4500 PSI, 110V

Hey PCP airgunners – stop slaving over an unwieldy manual pump or driving all the way to the SCUBA shop already!

With Benjamin's Recharge high-pressure air compressor, you’ll have all the air you need at your fingertips, whether to recharge an airgun directly or fill up a tank or two to use in the field. Using a standard U.S. 3-prong plug for 110v outlets, the Recharge is ready to do just that right out of the box in the convenience of your own home or wherever your airgunning travels take you.

There’s no need to worry about overfilling and damaging your valuable airguns. Its built-in automatic shutoff function stops the compressor at a set pressure. It also shuts off automatically after 30 minutes of runtime and it features a safety burst disc to prevent dangerous excess pressure. It is air and water cooled, reaches a maximum fill pressure of 4,500 psi and is for airguns, paintball cylinders and tanks up to 6.8 liters.

So, check out Benjamin’s Recharge high-pressure air compressor today, and give your shoulders and your odometer a well-deserved rest.

Helpful resources:

• Tips for buying a pcp compressor

Benjamin Recharge HPA Compressor

• Max fill 4500 psi
• For Airgun/Paintball Cylinders and tanks only (less than 6.8L)
• 110V with standard US 3 prong plug
• Automatic Pressure shutoff- stops at set pressure
• Automatic shut off after 30 minutes of continuous run time
• Air and water cooled
• Safety burst disk
• Female Quick Disconnect Fitting on end of hose
• Weight: 44 lbs.
• Dimensions: 17.52"Lx7.36"Wx15.95"H
• Fills a Discovery/ Maximus 0 – 2,000psi in 45 seconds
• Fills a Armada/Marauder 0 – 3,000psi in 1 mins 40 seconds
• Fills a 90Cu in buddy bottle 0 – 4,500psi in 14 mins

Limited Quantities

Item Code: BJ-BHPAC [PY-A-8979]